Chuck Meredith | F. D. Hurka Metrology

About Chuck Meredith

Chuck Meredith is a military veteran with over two decades of experience at FD Hurka Metrology. Since joining the company in 1999, Chuck dedicated 20 years to sales before stepping into the role of President in January 2020. Passionate about people and service, Chuck takes pride in ensuring FD Hurka provides exceptional gaging and calibration solutions to its customers.

Integrating CMMs with Shop-Floor Automation: What to Know

Coordinate measuring machine (CMM) integration with shop-floor automation ...

By Chuck Meredith|2025-12-08T09:42:46-05:00December 19th, 2025|Coordinate Measuring Machine|Comments Off

Precision Measurement in the Era of Smart Manufacturing

Precision measurements are the backbone of quality and ...

By Chuck Meredith|2025-12-02T10:45:03-05:00December 12th, 2025|Precision measurement|Comments Off

How Gage Block Calibration Supports Traceability

Your production line runs smoothly until a customer ...

By Chuck Meredith|2025-11-12T10:27:29-05:00November 26th, 2025|Calibration Services|Comments Off

Automotive Quality Control and the Critical Role of Advanced Gaging Systems in Manufacturing

Automotive quality control gaging systems determine manufacturing success ...

By Chuck Meredith|2025-11-12T10:00:57-05:00November 21st, 2025|Quality Control|Comments Off

Why Off-the-Shelf Gages Aren’t Enough

In manufacturing, precision measurement is critical to ensuring ...

By Chuck Meredith|2025-10-28T10:19:00-05:00November 14th, 2025|Custom Gages|Comments Off

Avoid Costly Mistakes: How Proper Caliper Use Impacts Accuracy and Compliance

Proper caliper use reduces measurement errors and supports ...

By Chuck Meredith|2025-10-06T15:41:26-05:00October 30th, 2025|Proper Caliper Use|Comments Off

Steps to Prepare for an ISO 17025 Audit

ISO 17025 audit preparation requires systematic documentation, staff ...

By Chuck Meredith|2025-10-06T15:29:00-05:00October 23rd, 2025|ISO 17025|Comments Off

From Manual to Automated: How Micro-Vu Bridges the Gap

Precision measurement is the foundation of quality in ...

By Chuck Meredith|2025-10-06T15:02:24-05:00October 16th, 2025|Micro-Vu|Comments Off

How Automated Gaging Increases Output Without Sacrificing Accuracy

Modern manufacturing demands higher production speeds without compromising ...

By Chuck Meredith|2025-10-06T14:46:48-05:00October 2nd, 2025|Gaging Equipment|Comments Off

How to Choose the Right CMM for Your Industry Application

Selecting the right coordinate measuring machine (CMM) requires ...

By Chuck Meredith|2025-10-06T14:45:43-05:00October 2nd, 2025|Coordinate Measuring Machine|Comments Off

Previous 234 Next

About Chuck Meredith

QUICK LINKS

SERVICES

SERVICE AREAS

CONTACT INFO